Shop

Designed to be mounted to a wall Supplied with 3 holes for fixing or clamping Comes complete with the Tilt Head 1/4'' screw attachment

Compact and light, for small 360° cameras Comes with a small detachable aluminium ball head Features 4 aluminium sections Holds a payload up to 1 kg

Simply drop in to lock the system and enjoy 360° freedom X LOCK system to ensure maximum rigidity Unique full compatibility thanks to universal attachments Lightweight and strong body holds up to 20kg/44.09 lbs Made of hard-anodized, machined aluminium

Ideal for suspending light fixtures or other items overhead 201 cm/79.1'' long; Junior receiver Load capacity: 40 kg/88 lbs Universal head with 28 mm/ 1 1/8'' socket & 16 mm/ 1 1/8'' pin Tommy bar on grid clamp included: No tools required Grid clamp works on diameters Ø 25-55 mm/1-2.16''

360°QR base that moves freely in any direction X LOCK system to ensure maximum rigidity Unique full compatibility thanks to the universal 3/8'' thread Lightweight and strong body holds up to 20 Kg /44.09 lbs Made of hard-anodized, machined aluminium

Load capacity: 40kg Counterweight included: 6.7kg Max extension 300cm

Give additional stability to monopods Designed to fit to the top end of any make of monopod Adjustable length with pivoting shoulder support 1/4'' female thread attachment and 3/8'' screw attachment Made of aluminium

Ideal for suspending light fixtures or other items overhead Long telehanger:381 cm/150'', Junior Load capacity: 40 kg/88 lbs Universal head with 28 mm/ 1 1/8'' socket & 16 mm/ 1 1/8'' pin Tommy bar on grid clamp included: No tools required Grid clamp works on diameters Ø 25-55 mm/1-2.16''

Carbon Fiber construction for great lightness Telescopic column for compactness 4kg payload to easily hold CSC cameras Aluminium ball head with independent 360° pan Padded bag included for easy storage and transport

Offer great grip Protect legs + insulate hands when using tripod in cold weather Set of 3 Manfrotto Patented Leg Warmers Zip system to easily fit tripod legs and not slip down in use Compatible with 190 series

Extra-rigid carbon fiber 3 section Legs Ground Level Adapter to reach ultra-low positions Levelling bubble to be always level to the horizon Extreme versatile thanks to 3 leg angle positions Roboust magnesium spidercast and leg locks

Holds full-frame CSC (without grip) and 70-200/2.8 lens attached New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...

Double articulated arms, to support loads up to 5Kg (11lb) Very lightweight, weighs 0,5 Kg (1lb) Two sections articulated arm, max length 62,5cm (24,6in) Sliding extension allow for flexible positioning.

Replacement Boom adaptor for Rycote windshields Connects boompole to windshield As supplied with all Rycote modular windshields

Double articulated arms, to support loads up to 4,5Kg (9,9lb) Very lightweight, weighs 0,79 Kg (1,7lb) Three sections articulated arm, max length 86cm (33,8in) Sliding extension allow for flexible positioning.

Double articulated arms, to support loads up to 5Kg (11lb) Very lightweight, weighs 0,64 Kg (1,4lb) Two sections articulated arm, max length 62,5cm (24,6in) Sliding extension allow for flexible positioning. Supplied with camera bracket

Replacement Boom adaptor for Rycote windshields Connects boompole to windshield As supplied with all Rycote modular windshields

Double articulated arms, to support loads up to 4,5Kg (9,9lb) Very lightweight, weighs 0,9 Kg (2lb) Three sections articulated arm, max length 86cm (33,8in) Sliding extension allow for flexible positioning. Supplied with camera bracket

Four aluminum sections with three risers Fully extended, it measures 13' (4 m) long For facilitating tilting, panning focusing or re-aiming of light

Provide levelling for tripod w/out built-in levelling mechanism 10° range of movement Fitted between tripod and head Universal 3/8'' thread attachment Made of aluminium

Retractable rubber/metal spiked feet Made of a special anodized aluminum alloy resistant to corrosion Designed for the 190MF4 Tripod

Rycote B2B clips mount two microphones in close proximity Fit any mic 19 to 25mm in diameter Ideal for MS setup Soft rubber internal grip to minimise noise and damage on the microphone body Comes with rubber bands to tighten the grip

Rycote 048493 XLR holder For use with a Rycote windshield when you're not using the pistol grip Securely holds the male XLR connector and stands it off from your boom pole Ideal for a cable and also for a plug on transmitter

Ø100mm Half Ball made in aluminum for pro-high durability use universal 3/8 screw for head attachment Long ergonomic locking handle

Ø100mm Half Ball made in aluminum for pro-high durability use universal 3/8 screw for head attachment Short locking handle ideal for ground level shooting

Strap for attaching to a bag Grey comfortable material Uses D rings for attachment Strong Comfortable to transport your tripod

Unique Offset Design Perfect accessory for the Super Clamp Raise lighting power packs off the floor 15 Kg Payload Multiple utility uses in and out of the studio

compatible with Fujinon ENG Lenses Convert 524FN Fujinon cable to the twelve-pin configuration made in italy

Mid level tripod spreader to fit Manfrotto video Tripods Variable arm length Click stop set positions Gives extra rigidity making your tripod more stable in use Lightweight 0.94 kg

Assembles in minutes Made from durable metal material

Product Type :Camera Other Accessories Package Dimensions :45.2 Cm L X8.2 Cm W X8.2 Cm H Package Weight :1.0Lbs Package Quantity :1

Ø60mm Half Ball made in aluminum for pro-high durability use Universal 3/8” screw for head attachment Short locking handle ideal for ground level shooting

Made in Italy Use when its not possible to use the dual spiked feet ideal on slippery or glossy floors

Manfrotto 595CLA Fig Rig Clamp

T-Bar 1,2m long M10 screw Made of Zinc steel 122cm long

Color: Silver Tone Weight: 300 g Material: Galvanized steel

Top attachment 1/8'' (28mm stud) M12 screw attachment 14cm in height Made of zinc steel

Connected to head, monopod, tripod by a 3/8'' female attachment Graduated scale in millimeters to set the camera position  Dual 1/4'' and 3/8'' camera fixing screw Made of aluminium

A high quality clamp tripod with a rapid-locking jaw Compatible with Super Clamp pins, hooks and studs Payload of 15 Kg, hexagonal 16mm attachment with 6.35mm thread Clamps on bars and plates from 13-55mm Safety Tüv certification