Shop

40'' Lazy-Leg/Levelling Leg C-stand in black chrome steel. Rocky Mountain leg- works great on stairs and uneven terrain. Most popular size C-Stand for holding flags, floppies & lights. Works great with D200B grip head & D500B series grip arms 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg...

Key features: Arri locating points Threaded openings - 1/4" 2 poinst of cage-to-camera attachment (2x bottom 1/4") Full access to camera features Clean-cut ergonomic design Aluminum made and Lightweight

40'' Lazy-Leg/Levelling Leg C-stand kit in silver chrome steel. Rocky Mountain leg C-Stand- great on stairs & uneven terrain. Most popular size C-Stand for holding flags, floppies & lights. Complete w/A2033L C-Stand, D200B grip head, & D520B grip arm 40'' C-Stand has 3 sections, 2...

Locking T-handle - large knob to lock all 3 movements.  Load capacity: 3kg 5/8'' stud on each end

Key features: 1/4" mounting points (on top & both sides) Arri locating point (3/8" mounting point on top) Anti-twist M2.5 screw fixed to the Eyelet attachment Strap holder M4 threads (top front, bottom front) Easy access Lightweight build

366x366 cm Overhead Frame Set  Carrying Bag Basic Set of rags

Key features: M12 Female threads on both ends Available lenghts: 10, 15, 20, 25, 30cm Aluminum made

Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...

Junior roller stand with folding leg base and braked wheels Very popular stand for holding LED, fresnels and smaller HMI's. 4 sections, 3 risers. Ø: 45, 40, 35, 30 mm. Steel column, aluminium risers & captive locking T-knob handles. Folding base great for self-standing storage when not in use

Essential accessory for everyday use. Lens' are just as, or if not more, important than the camera itself. So when setting up your rig, don't forget to support the lens.

Key features:- 1/4” mounting points- 3/8” mounting points with Arri locating pins- M4 mounting points- Cold shoe mount- Strap holder- Aluminum made- Lightweight construction

Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 4 sections, 3 risers. Ø: 35, 30, 25, 20 mm. Leg Ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...

Key features: Ergonomic Walnut wood Attachment: 32mm Arri Rosette Toolless monting (thumbscrew) Left side compatible

Essential accessory for everyday use.

25mm to 65mm gaffer grip for great versatility Adjustable jaws ensure a tight and secure grip Complete with two 16mm baby studs for added versatility Designed with world-leading Italian quality standards Gaffer grip attaches to a wide range of accessories

Key features: Pre-assembled three-piece half cage Solid cage-to-camera attachment (1x top & 2 x bottom 1/4 “ mounting screws) 3/8” Arri locating points 1/4" threaded openings Strap holder Cold shoe

Key features: Solid cage-to-camera attachment Arri locating points (+ 3/8" mounting point) 1/4" mounting points 3-piece cage Aluminum made

Key features: Arri locating points (+ 3/8" mounting point) 8 x 1/4" mounting threads 4 x M4 mounting threads 2 points of plate-to-camera attachment Aluminum made

Key features: 2 points of support-to-cage attachment 2 points of support-to-adapter attachment Aluminum made Lightweight

16 mm/ 5/8'' baby pin: scissor clip designed for drop ceilings Ideal for small and medium light fixtures Works well with C1005 to hold cables Easily tighten and remove scissor clip by spinning the baby pin Special adapters should be carried in all kits

Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 4 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder

Cable support with scissor clip designed for drop ceilings Ideal to support cables and cords from drop ceilings Works well with C1000 baby pin scissor clips Easily tighten and remove scissor clip by turning thumb screw Special adapters should be carried in all kits

Key features: Stainless steel PL mount flange 0,005mm accuracy Infinity focusing Aluminum alloy and stainless steel Black/silver anodized Weight ( without PL cap) - 376 g / 13.3 oz

Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 2 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder

Super Clamp™ jaws work on diameters from 13-55mm/ 0.51-2.16'' TÜV/SÜD certified Load capacity:15 kg/33.1 lbs, used with numerous adapters & arms 16 mm/ 5/8'' hexagonal receiver with double safety lock Available in an HD Gravity Cast version- C1550

Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light. 

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Base model MP with non-threaded 12.5 mm/0.5'' hole. Customisable Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light. 

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with junior 28 mm/1 1/8'' TV Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with baby 16 mm/ 5/8'' Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

- Compatibility with Sony FX3 and FX30- Aluminum made- 2 points of support-to-cage attachment- 1 point of support-to-adapter attachment

Black solid flag (Cutter) for light control purposes, Used to control natural or artificial light, The smallest useful Cutter Size from Udengo 

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP Eye Coupler w/M12 bolt & wing nut. Direct connection to yokes Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

Key features:- Compatibility with Sony FX3 and FX30- 15mm rod standard- Integrated Cold Shoe- Secure mount prevents deviation (2x1/4")- Aluminum made- Lightweight

366x366cm Overhead Frame Set

Joined twin MP couplers free to swivel a full 360° radius Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Easily connect trusses, bars or pipes Made from aluminium in a silver finish Wing nut tightening to secure both swivel couplers in place

Key features: 1/4" mounting screw 180° tilt adjustment Tool-free Rubber pads Aluminum made

Aluminum Construction 6 - 10" Length 1 1/8" Junior Stud

Key features: Fabric + plastic insert Detachable Foldable Attachment: velcro straps