Shop

Holds full-frame CSC (without grip) and 70-200/2.8 lens attached New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...

Load capacity: 9 kg/19.8 lbs., Max Height: 450 cm/177.2'' Chrome plated steel stand & steel risers, silver only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 4 sections, 3 risers, Ø: 35, 30, 25, 20 mm Mobile Column w/double locking T-knobs on the spider castings

It is for the base of the Backlight Stand Two section black aluminum pole to raise small lighting fixture It can be used as a small portable boom

Holds full-frame CSC with attached grip and 70-200/2.8 lens New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...

The largest reusable all in one Chroma Key background kit Ultra-Fast assembly time Ideal for working on location Huge working area, small pack down size Effortlessly packs down into included carry bag

pivoting clamp for use with all Super Booms and Heavy Duty Booms for 35mm diameter boom shafts 1/8'' male, and 5/8'' female receptor

Heavy-duty and lightweight photographic hard-case made in Italy IP67 testing approved for water and dust protection Built to withstand the toughest conditions of use Safe release system latches for optimum security and protection Durable 2-stage telescopic handle with self-locking system

It allows mounting of the 3085 Boom Arm to a heavy duty stand It permits tilt, swing and swivel Easy to use

Spigot with two 3/8'' screws Versatile use Two 3/8'' screw attachments Made of Brass

Extend from 66 to 188cm (from 25 to 74 in) Made in aluminium black 3 sections

Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...

Junior roller stand with folding leg base and braked wheels Very popular stand for holding LED, fresnels and smaller HMI's. 4 sections, 3 risers. Ø: 45, 40, 35, 30 mm. Steel column, aluminium risers & captive locking T-knob handles. Folding base great for self-standing storage when not in use

Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment

Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment 2 positional head mounts on the side arm for mounting of 4 hea

Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 4 sections, 3 risers. Ø: 35, 30, 25, 20 mm. Leg Ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...

Geared column with clamp Compatible with table thickness from 18-38mm Adjustable between 5cm and 66cm 3/8'' screw attachment

Top attachment 5/8'' (16mm) stud Attachement 5/8'' (16mm) socket Aluminium Construction  9,7cm in height

25mm to 65mm gaffer grip for great versatility Adjustable jaws ensure a tight and secure grip Complete with two 16mm baby studs for added versatility Designed with world-leading Italian quality standards Gaffer grip attaches to a wide range of accessories

16mm Hexgon stud for Super Clamp Top attachment 16mm Hexgon stud for Super Clamp Used to fix two superclamp 16,5cm in height

It extends the height of your heavy duty cine stand 49.2 - 82.7'' It has two black sections, one riser Made of aluminium

Minimum extension is 4.3ft (1.3m), the maximum is 7.25ft (2.2m) One riser is 35mm in diameter, the second is 30mm in diameter Chrome steel extension

Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras

16 mm/ 5/8'' baby pin: scissor clip designed for drop ceilings Ideal for small and medium light fixtures Works well with C1005 to hold cables Easily tighten and remove scissor clip by spinning the baby pin Special adapters should be carried in all kits

For polystyrene Gobo's Supplied with 1/4'' and 3/8''female attachments Robust construction Size: 12,5 x 20cm

Cable support with scissor clip designed for drop ceilings Ideal to support cables and cords from drop ceilings Works well with C1000 baby pin scissor clips Easily tighten and remove scissor clip by turning thumb screw Special adapters should be carried in all kits

It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections Made of aluminium

Fits Pro DSLR with 70-200mm lens plus 4-5 additional lenses Full backside access with front molded EVA bumpers Side access for quick lens changes CradleFit™ pocket suspends and protects 15” laptop All Weather AW Cover™ for premium protection from the elements

Super Clamp™ jaws work on diameters from 13-55mm/ 0.51-2.16'' TÜV/SÜD certified Load capacity:15 kg/33.1 lbs, used with numerous adapters & arms 16 mm/ 5/8'' hexagonal receiver with double safety lock Available in an HD Gravity Cast version- C1550

It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections This steel stand extension has a chrome finish

Fits Mirrorless with 70-200mm lens plus 3-4 additional lenses Full backside access with front molded EVA bumpers Side access for quick lens changes CradleFit™ pocket suspends and protects 13” laptop All Weather AW Cover™ for premium protection from the elements

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Base model MP with non-threaded 12.5 mm/0.5'' hole. Customisable Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

Spigot with 1/4'' and 3/8'' screws Versatile use 3/8'' to 1/4'' screw attachments Made of Brass

Fits Mirrorless with 70-200mm lens plus 3-4 additional lenses Full backside access with front molded EVA bumpers Side access for quick lens changes CradleFit™ pocket suspends and protects 13” laptop All Weather AW Cover™ for premium protection from the elements

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with junior 28 mm/1 1/8'' TV Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

Reducing Bushing Set, from female 3/8'' to 1/4'' male screw Female adapter 3/8'' to 1/4'' Made from Nickel plated Steel 0,5cm in height

Fits crop-sensor CSC with lens attached plus 1-2 small lenses Extra lightweight & 75% of all fabric is recycled* Side access with integrated, removable GearUp camera insert Strap system designed for multiple carrying configurations Keep hydrated with a 2-litre dedicated hydration pocket

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with baby 16 mm/ 5/8'' Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

1/4'' screw, 5/8'' (16mm) stud Attachement 3/8'' to 1/4'' screw 2,6cm in height Made of Brass

Expands to hold up to DSLR with 24-70mm f/2.8 and lens hood Wear 4 ways: shoulder, holster style, chest harness or on belt Top organizer pocket separated from main compartment Compact and built for speed with expandable structure All Weather AW Cover™ protects gear from rain. dust and sand

Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP Eye Coupler w/M12 bolt & wing nut. Direct connection to yokes Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

5/8'' (16 mm) stud and a socket for 11/16'' (17.5 mm) male studs 5/8'' to 17,5mm female adapter Easy to mount 7,8 cm in height

Joined twin MP couplers free to swivel a full 360° radius Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Easily connect trusses, bars or pipes Made from aluminium in a silver finish Wing nut tightening to secure both swivel couplers in place

It is 3.46'' (8.8 cm) long Its unique indentations mesh perfectly with the locking screw 8,8cm in length 16mm female adpater 5/8