Baby Stand 10 Steel Base Alu Risers Sil...
Load capacity: 15 kg/33 lbs., Max Height: 100 cm/39.37'' Chrome Steel legs & aluminium risers, silver only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 3 sections, 2 risers, Ø: 35, 30, 25 mm Mobile Column w/double locking T-knobs on the spider castings
€251.69Overhead DIY Set
€293.45
Baby Stand 30 Silver 300cm/118in Steel Triple...
Load capacity: 10 kg/22 lbs., Max Height: 300 cm/118.1'' Chrome plated steel stand & steel risers, silver only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 4 sections, 3 risers, Ø: 35, 30, 25, 20 mm Mobile Column w/double locking T-knobs on the spider castings
€314.67Baby Stand 40 Silver 400cm/157in Steel Triple...
Load capacity: 9 kg/19.8 lbs., Max Height: 400 cm/157.5'' Chrome plated steel stand & steel risers, silver only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 4 sections, 3 risers, Ø: 35, 30, 25, 20 mm Mobile Column w/double locking T-knobs on the spider castings
€382.1418X24'' OPEN FRAME
€42.51
Baby Stand 45 Black 450 cm/178 in Alu Triple Riser
Load capacity: 10 kg/22 lbs., Max Height: 450 cm/177.2'' Aluminium legs & aluminium risers, black only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 4 sections, 3 risers, Ø: 35, 30, 25, 20 mm Mobile Column w/double locking T-knobs on the spider castings
€354.25Baby Stand 45 Sil 450 cm/178 in Steel Triple Riser
Load capacity: 9 kg/19.8 lbs., Max Height: 450 cm/177.2'' Chrome plated steel stand & steel risers, silver only. Leg: 20 mm x 20 mm, 1 Levelling Leg. Wheels not recommended 4 sections, 3 risers, Ø: 35, 30, 25, 20 mm Mobile Column w/double locking T-knobs on the spider castings
€390.24Overhead Frame 366x366cm Full Set
366x366 cm Overhead Frame Set Carrying Bag Basic Set of rags
€1,512.0115mm Silver Rods
Key features: M12 Female threads on both ends Available lenghts: 10, 15, 20, 25, 30cm Aluminum made
€16.58Baby Roller Low Base 290cm/114in CS Base, Alu...
Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 3 sections, 2 risers. Ø: 35, 30, 25 mm. Leg ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...
€411.38B-Stock Open Single scrim 60x90cm
€102.28 €120.33
Baby Roller Stand High Low Base 3.4m/11.2' CS &...
Junior roller stand with folding leg base and braked wheels Very popular stand for holding LED, fresnels and smaller HMI's. 4 sections, 3 risers. Ø: 45, 40, 35, 30 mm. Steel column, aluminium risers & captive locking T-knob handles. Folding base great for self-standing storage when not in use
€504.9515mm Universal Lens Support
Essential accessory for everyday use. Lens' are just as, or if not more, important than the camera itself. So when setting up your rig, don't forget to support the lens.
€109.38Leica SL2 / SL2-S Cage
Key features:- 1/4” mounting points- 3/8” mounting points with Arri locating pins- M4 mounting points- Cold shoe mount- Strap holder- Aluminum made- Lightweight construction
€186.72Baby Roller Stand High Low Base 4.3m/14.1' CS &...
Baby roller stand with low leg base and braked wheels Steel column, aluminium risers & captive locking T-knob handles. 4 sections, 3 risers. Ø: 35, 30, 25, 20 mm. Leg Ø: 20 x 20 mm Nuts & bolts construction complete with levelling leg Mobile Column w/double locking T-knobs on the spider...
€449.62Left Side Wooden Grip with 32mm Arri Rosette
Key features: Ergonomic Walnut wood Attachment: 32mm Arri Rosette Toolless monting (thumbscrew) Left side compatible
€153.58Arri Nato Rosette 28mm Mount
€49.72
ADJUSTABLE GAFFER GRIP
25mm to 65mm gaffer grip for great versatility Adjustable jaws ensure a tight and secure grip Complete with two 16mm baby studs for added versatility Designed with world-leading Italian quality standards Gaffer grip attaches to a wide range of accessories
€60.50Arri Nato Rosette 28mm Mount + Safety Nato Rail...
Essential accessory for everyday use.
€60.65Half Cage for BMPCC 6K Pro / 6K G2
Key features: Pre-assembled three-piece half cage Solid cage-to-camera attachment (1x top & 2 x bottom 1/4 “ mounting screws) 3/8” Arri locating points 1/4" threaded openings Strap holder Cold shoe
€109.38Cage for the Red Komodo
Key features: Solid cage-to-camera attachment Arri locating points (+ 3/8" mounting point) 1/4" mounting points 3-piece cage Aluminum made
€120.44Barrel Clamp, Silver w/Wingnut
€111.34
Top Plate for Red Komodo / Komodo-X
Key features: Arri locating points (+ 3/8" mounting point) 8 x 1/4" mounting threads 4 x M4 mounting threads 2 points of plate-to-camera attachment Aluminum made
€27.62Canon EF to RF Speed Booster Adapter Support...
Key features: 2 points of support-to-cage attachment 2 points of support-to-adapter attachment Aluminum made Lightweight
€22.10Drop Ceiling Scissor Clamp w/Baby Pin 16mm/ 5/8in
16 mm/ 5/8'' baby pin: scissor clip designed for drop ceilings Ideal for small and medium light fixtures Works well with C1005 to hold cables Easily tighten and remove scissor clip by spinning the baby pin Special adapters should be carried in all kits
€17.77Wag Flag Quarter Grid
€70.21
Drop Ceiling Scissor Clip with Cable Support
Cable support with scissor clip designed for drop ceilings Ideal to support cables and cords from drop ceilings Works well with C1000 baby pin scissor clips Easily tighten and remove scissor clip by turning thumb screw Special adapters should be carried in all kits
€23.62Cage For Atomos Ninja V / V+
Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 4 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder
€104.97Wag Flag Half Grid
€70.21
Super Clamp™ T-Knob Silver, 13mm-55mm/0.51 to...
Super Clamp™ jaws work on diameters from 13-55mm/ 0.51-2.16'' TÜV/SÜD certified Load capacity:15 kg/33.1 lbs, used with numerous adapters & arms 16 mm/ 5/8'' hexagonal receiver with double safety lock Available in an HD Gravity Cast version- C1550
€49.26Cage For Atomos Shinobi
Key features: 1/4" threaded openings Built-in NATO rails HDMI protective clamp 2 points of monitor-to-cage attachment 3/8" to 1/4" reduction screw Easy access to all sockets One piece of aluminum Strap holder
€93.91Wag Flag Full Grid
€70.21
Eye Coupler MP Clamp w/Wingnut...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Base model MP with non-threaded 12.5 mm/0.5'' hole. Customisable Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€31.268Sinn Lens Adapter Support for Evolution RF to...
€27.62
Floppy Cutter 60cm x 120cm (24" x 48")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€184.45Wag Flag Denim
€70.21
Eye Coupler MP Clamp w/28mm/1 1/8'' Spigot,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with junior 28 mm/1 1/8'' TV Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€41.61Floppy Cutter 60cm x 180cm (24" x 70")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€238.00Wag Flag Ultrabounce
€70.21
Eye Coupler MP Clamp w/16mm/5/8in Spigot,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP cheesboro clamp with baby 16 mm/ 5/8'' Spigot Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€39.36Floppy Cutter 100cm x 100cm (40" x 40")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€214.20Wag Flag Light Box Magic
€70.21
Eye Coupler MP w/M12 Bolt & Nut,...
Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP Eye Coupler w/M12 bolt & wing nut. Direct connection to yokes Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified
€32.61Lens Adapter Support for 8Sinn Cage for Sony...
- Compatibility with Sony FX3 and FX30- Aluminum made- 2 points of support-to-cage attachment- 1 point of support-to-adapter attachment
€20.99Cutter 25cm x 100cm (10" x 40")
Black solid flag (Cutter) for light control purposes, Used to control natural or artificial light, The smallest useful Cutter Size from Udengo
€77.35Wag Flag HiLite
€70.21
Eye Coupler MP w/Baby Receiver,...
Joined twin MP couplers free to swivel a full 360° radius Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' Easily connect trusses, bars or pipes Made from aluminium in a silver finish Wing nut tightening to secure both swivel couplers in place
€65.0015mm Single Rod Clamp with Cold Shoe for 8Sinn...
Key features:- Compatibility with Sony FX3 and FX30- 15mm rod standard- Integrated Cold Shoe- Secure mount prevents deviation (2x1/4")- Aluminum made- Lightweight
€32.05