Shop

The Lyre is a patented suspension system that is known for its durability and strength. Unlike other suspensions that use elastic or rubber components, the Lyre is virtually unbreakable and resistant to wear and tear. It has replaced the traditional silicone O-rings suspension and is compatible...

Offers much improved isolation from camera noise Suitable for cameras with a 1/4'' female thread Virtually indestructible

Supplied with a corresponding Rycote Windjammer Made of durable, high quality open-cell acoustic foam For mics 24-25mm in diameter. Slots less than 5cm from mic front

30% lighter than existing Modular windshield kits Smaller overall footprint compared to existing kits Interchangeable magnetic basket halves for fast setups & mic swaps Redesigned & patented Lyre mounts offer improved handling noise reduction for lightweight microphones No tools are...

Using both foam and windjammer together provides up to 20dB wind and pop Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam The Windjammer offers a further 12dB wind noise attenuation

30% lighter than existing Modular windshield kits Smaller overall footprint compared to existing kits Interchangeable magnetic basket halves for fast setups & mic swaps Redesigned & patented Lyre mounts offer improved handling noise reduction for lightweight microphones No tools are...

Shotgun microphones with slots no further than 12cm from the front of mic

Supplied with a corresponding Rycote Windjammer Made of durable, high quality open-cell acoustic foam For mics 24-25mm diameter, slots less than 18cm from mic front

For Sony DCR-VX1000 and DCR-VX2000 Mics For Sony DCR-VX2100 Microphone Fits Mics up to 2" Diameter & 2.75" Long Designed for Use over a Foam Windshield

Mini windjammer for Zoom H6 with MSH-6 caspule.

Up to 10dB wind/pop noise attenuation, min high-frequency loss Excellent resistance to moisture and UV light This windshield offers up to 20 dB wind noise attenuation Discreet slip-on windshield Made from durable, high quality open-cell acoustic foam

Up to 10dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam

Pack of 20 Fits A Wide Range Of Microphones Lightweight But Tough

Pack of 20 Fits A Wide Range Of Microphones Lightweight But Tough

Pack of 20 Fits A Wide Range Of Microphones Lightweight But Tough

FEATURES Weatherproof cover for mono and stereo windshields Diffuses rain droplets sound Minimises rain noise when recording in wet weather conditions

FEATURES Weatherproof cover for mono and stereo windshields Diffuses rain droplets sound Minimises rain noise when recording in wet weather conditions

Suitable for Large Diaphragm recording microphone Offers upto twice the isolation from cable and stand-borne noise Virtually indestructible Suspension weight: 145 gOverall diameter: 120 mm (4.72″)Length: 170 mm (6.39 ') Depth: 70 mm (2.75″)Microphone diameters: 55-68 mmMicrophone length: up to...

Compact design Ultra low noise circuitry Sophisticated RF shielding Low power consumption

Compact design Ultra low noise circuitry Sophisticated RF shielding Low power consumption

Compact design Ultra low noise circuitry Sophisticated RF shielding Low power consumption

Lighter, Smaller & More Flexible Advanced Lyre Mounts No tools needed to make adjustments or swap out Lyre mounts Better acoustic transparency with less high frequency loss Low profile XLR cable with RF filter & switchable 80Hz low-cut

Gravity Casting It works on diameters form 13mm to 55mm (0,5 to 2,1 in) It allows heavier manipulation

Smallest junior steel stand extension! Length 28 cm/11'' Chrome plated steel Junior 28 mm/ 1 1/8'' pin; for stands, clamps and junior sockets Provides extension of a traditional combo or universal head Medium (C624) and long (C626) stand extensions are available

FixedArms Chrome plated steel arm Provided with two fastening straps Load capacity: 10kg (22 lbs)

Stand Accessories Safety cable with locking carabiner 30 kg/ 66 lb payload when set properly and statically loaded Diameter 4 mm/0.157'' with a length of 100 cm/39.37'' Works with clamps and couplers for added overhead security Great for security of lights overhead on sets, truss & grids

Load capacity: 9kg 1 levelling leg Chrome plated steel stand (A0035CS) Supplied with T-Top Max height: 350cm

Max Payload: 10kg Max Height Group: 0-10 inch Leg Section: 1 Section

Couplers Made from aluminium in silver finish Jaws clamp down on pipes ranging from 42-52 mm/1.65-2.04'' MP Eye Coupler with lifting ring for wires, chains and ropes. Max Capacity 300 kg/661.4 lbs TÜV/SÜD certified

Couplers Max load: 300kg Made from aluminium alloy Easy to connect trusses, bars or pipes

Silver Overhead Stand with built-in grip head & junior receiver Works well with overhead, modular & fold away butterfly frames Standard base w/o wheels. Optional A9000N wheels available Mobile Column w/double locking T-knobs on the spider castings 4 sections, 3 risers. Ø: 45, 40, 35, 30...

Wind Up Stands Heavy duty light stand with a loading height- 177 cm/69.7 '' Winch-driven hoisting system w/red safety lowering-load clutch 270 mm/10.6'' Foam filled wheels designed for all kinds of terrain 3 Adjustable Levelling legs with 3 swivel block braked wheels Maximum load capacity:120...