PRO Light Backloader Backpack M for CSC/DSLR
Holds full-frame CSC with attached grip and 70-200/2.8 lens New M-Guard™ provides the highest level of gear protection Safe rear access & top opening to 100% padded gear compartment SAS-TEC structural base reinforcement for extra shock protection Double side tripod connection points for...
€203.16Chroma Key FX 4x2.9m Background Kit Greenn
The largest reusable all in one Chroma Key background kit Ultra-Fast assembly time Ideal for working on location Huge working area, small pack down size Effortlessly packs down into included carry bag
€903.72Neutral Density 64 Filter with 67mm diameter
This filter reduces light entering the camera lens by 6 stops Compatible with all threaded 67mm lenses Flexibility to allow for wider and slower shutter speeds Multicoated optical glass for water and oil repellence. reusable case included
€62.67Super Boom Pivot Clamp
pivoting clamp for use with all Super Booms and Heavy Duty Booms for 35mm diameter boom shafts 1/8'' male, and 5/8'' female receptor
€64.41PRO Light Tough TH-83 Case
Heavy-duty and lightweight photographic hard-case made in Italy IP67 testing approved for water and dust protection Built to withstand the toughest conditions of use Safe release system latches for optimum security and protection Durable 2-stage telescopic handle with self-locking system
€227.74 €277.74Vinyl Background / Floor 2.75m x 6m Chroma Key...
ChromaKeyVinyl Pairs perfectly with Manfrottos Chroma Key Background range Can be used as a background or wide floor covering Hard-wearing, easy to clean and reusable Matte finish – to prevent unwanted reflections Strong aluminium inner-core tube
€451.74Pivoting Clamp For Light Boom
It allows mounting of the 3085 Boom Arm to a heavy duty stand It permits tilt, swing and swivel Easy to use
€55.37Tło + Rama EzyFrame Vintage 2 x 2.3m Ink
€423.72
Black Steel Super Stand
Stable and secure with double leg bracing Comes with handy universal head type, socket and stud Includes an innovative levelling leg for rough terrain Handles up to 40kg
€435.02SHORT ADAPTER SPIGOT 3/8''+3/8''
Spigot with two 3/8'' screws Versatile use Two 3/8'' screw attachments Made of Brass
€4.74EzyFrame Vintage Background 2 x 2.3m Sage
EzyFrame Rapid Assembly Aluminium Frame Easy to attach, clip on Sage Cover Rigid Carry Case Interchangeable with other Ezyframe Covers Made in the UK
€423.72Pico Clamp
Ultra small clamp tripod with a variety uses Supports payload of up to 2kg on its vertical axis Female and male 6.35mm and 9.5mm ends Aluminium construction with black and red anodized finish Ability to securely hold thin bars (8-15mm)
€27.29 €37.29B-Stock 100 cm foam lined bag
€106.35 €125.11
EzyFrame Vintage Background Cover 2 x 2.3m Sage
EzyFrame Alternative or replacement cover Easy to attach, clip on Sage Cover High quality fabric Made in the UK
€248.36Overhead Frame 366x366cm Full Set
366x366 cm Overhead Frame Set Carrying Bag Basic Set of rags
€1,512.01Element MII Video Monopod Aluminium Kit with...
Brilliant footage smoothness, supremely light and stable Able to support up to 4Kg, weighs just 1kg Fully foldable head and base feet for maximum portability Patented fluid base for judder-free panning action Twist-locks ensure easy set-up and extreme compactness
€169.26VR 360 Suction cup with joint and adapter
Suction cup for flat non-porous surfaces Ball-joint socket to move the 360o camera in different positions Dual-sided design 5/8” adapter spigot included Extremely sturdy retaining mechanism with safety pin Supports up to 2kg
€120.90B-Stock SUPER CLAMP without packaging
6Version sold without packaging The most versatile lighting accessory It successfully holds equipment weighing up to 15Kg TUV safety certificate Ergonomic lock handle A wide range of compatible adapters and accessories
€20.99 €24.69EzyFrame Vintage Background Cover 2 x 2.3m Pewter
EzyFrame Alternative or replacement cover Easy to attach, clip on Pewter Cover High quality fabric Made in the UK
€248.36Reversible rubber/metal spiked foot
Set of 3 reversible rubber/metal spiked feet Supplied with a dedicated fixing tool Made of a special hard anodised aluminium alloy Extremely resistant to corrosio
€29.15B-Stock Collapsible Reflector Holder
Extend from 66 to 188cm (from 25 to 74 in) Made in aluminium black 3 sections
€70.83 €83.34Repro Arm with Double Camera Attachment Black
Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment
€96.04Accessory Arm For 4 Heads
Allow positioning of 2 heads on a 90° perpendicular angle Mounts on any column with 3/8'' thread and 60mm disc 3/8'' female thread attachment 2 positional head mounts on the side arm for mounting of 4 hea
€155.70Frame Bag
For All Udengo Frames Practical pockets inside
€59.50Table Attached Centre Post
Geared column with clamp Compatible with table thickness from 18-38mm Adjustable between 5cm and 66cm 3/8'' screw attachment
€224.85Stand Adapter from 5/8" to 1/2"
Top attachment 5/8'' (16mm) stud Attachement 5/8'' (16mm) socket Aluminium Construction 9,7cm in height
€15.59Extension Bar Black For Super Clamps
16mm Hexgon stud for Super Clamp Top attachment 16mm Hexgon stud for Super Clamp Used to fix two superclamp 16,5cm in height
€14.69Heavy Extension Aluminium One Section Black
€82.49
Black Aluminium Extension 2-Section Stand
It extends the height of your heavy duty cine stand 49.2 - 82.7'' It has two black sections, one riser Made of aluminium
€112.77Steel Extension 2-Section Stand
Minimum extension is 4.3ft (1.3m), the maximum is 7.25ft (2.2m) One riser is 35mm in diameter, the second is 30mm in diameter Chrome steel extension
€119.55Camera/Umbrella Bracket For 143
Standard 1/4-20 inch thread mount for cameras Replacement camera platform for the Magic Arm Made of aluminium Standard 1/4 thread for cameras
€19.21Fork for Styrene Gobos
For polystyrene Gobo's Supplied with 1/4'' and 3/8''female attachments Robust construction Size: 12,5 x 20cm
€17.85Black Aluminium High Stand Extension
It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections Made of aluminium
€144.40Steel High Stand Extension
It extends a duty stand of additional 53 - 123.6'' (1.4 - 3.1 m) It has two locking riser sections This steel stand extension has a chrome finish
€154.80Short Adapter Spigot 3/8'' and 1/4''
Spigot with 1/4'' and 3/8'' screws Versatile use 3/8'' to 1/4'' screw attachments Made of Brass
€4.74Floppy Cutter 60cm x 120cm (24" x 48")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€184.45ADAPTER SMALL 3/8 TO 1/4 SET 5
Reducing Bushing Set, from female 3/8'' to 1/4'' male screw Female adapter 3/8'' to 1/4'' Made from Nickel plated Steel 0,5cm in height
€5.65Floppy Cutter 60cm x 180cm (24" x 70")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€238.00Adapter Stud 5/8'' to 3/8'' thread
1/4'' screw, 5/8'' (16mm) stud Attachement 3/8'' to 1/4'' screw 2,6cm in height Made of Brass
€7.91Floppy Cutter 100cm x 100cm (40" x 40")
Black solid flag (Cutter) for light control purposes. Used to control natural or artificial light.
€214.2016mm Female Adapter 17.5 to 5/8''
5/8'' (16 mm) stud and a socket for 11/16'' (17.5 mm) male studs 5/8'' to 17,5mm female adapter Easy to mount 7,8 cm in height
€17.85Cutter 25cm x 100cm (10" x 40")
Black solid flag (Cutter) for light control purposes, Used to control natural or artificial light, The smallest useful Cutter Size from Udengo
€77.3516mm Female Adapter 5/8''
It is 3.46'' (8.8 cm) long Its unique indentations mesh perfectly with the locking screw 8,8cm in length 16mm female adpater 5/8
€14.69Overhead Frame 366x366cm QR Set
366x366cm Overhead Frame Set
€765.65Microphone Support "T" Arm, Black
Microphone support that attaches with a 16mm pin Measures just 65cm in length Made from durable aluminium Allows you to easily tailor your kit Crafted to Italy’s world-leading quality standards
€101.47Gel Frame 60x60cm (24x24")
€77.35
Double Ball Joint Head
Extremely versatile camera support Perfect to be used in conjunction with the Super Clamp system Features camera platform supplied with a 1/4-20'' screw Max payload 5.0Kg (11lb) Height 14,5cm (5,7in)
€59.89Gel Frame 122x122cm (48x48")
€136.85