Essential accessory for everyday use. Lens' are just as, or if not more, important than the camera itself. So when setting up your rig, don't forget to support the lens.

Key features:- Three-piece clamp- Adjustable span- Aluminum made

- 1/4” mounting points- M4 mounting points- strap holders- cold shoe mount- lightweight build- aluminum made

- 2 x Arri locating points- 1 x cold shoe mount- 1/4" mounting points- Attachment: 3/8" thread + Arri locating pins- No-tools adjustment- Lightweight construction- Modern design

Handle key features:- Quick-release system- Front/back, left/right adjustment- 1/4" and 3/8" mounting points- 2 cold shoe mounts- 15mm rod opening- NATO standard mounting- Aluminum madeRail key features:- NATO Standard- 95mm long- 2 safety pins- 1/4" threaded openings- 3/8" threaded opening +...

- 1/4" mounting points- One mounting screw (bottom)- Cold shoe mount- Strap holder- 3/8" Arri locating points- Standardized spread of the mounting points- Better access to on/off switch

Baseplate features 2 x 32mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded oppenings Dovetail guide rails (bottom) Riser Plate features: 1/4" and 3/8" mounting screw Rubber pads Dovetail features: Length: 5" (127mm) Release pin Stopper screw Helicoil 1/4" and 3/8" threads

Baseplate features 2 x 32mm Arri Rosettes 15mm rod compatible 3 x thumbscrews 4 x 1/4" threaded oppenings Dovetail guide rails (bottom) Riser Plate features: 1/4" and 3/8" mounting screw Rubber pads Dovetail features: Length: 5" (127mm) Release pin Stopper screw Helicoil 1/4" and 3/8" threads

Horizontal Payload Panning or Linear: 33.1 lbs (15kg) Vertical Payload Tilting or Linear Vertical: 3.3 lbs (1.5kg) Max Panning Speed 60 Degree/Sec Max Linear Speed 40mm/Sec Battery Life Time-lapse 48hrs Battery Life Video 5hrs Bluetooth4.2 Wifi Yes Interface USB-C 2.5mm port App Control Yes...

Connect two Genie Minis or Genie Mini II’s for pan tilt motion Combine additionally with Genie or Genie II Linear for 3-axis Camera is adjustable allowing for some nodal point centering Tilt arm is adjustable allowing some vertical axis repositioning Breaks down to two compact portable bracket...

Key features: Three-piece clamp Adjustable span Aluminum made

- Compatibility with Sony FX3 and FX30- Aluminum made- 2 points of support-to-cage attachment- 1 point of support-to-adapter attachment

Key features: 4 points of plate-to-camera attachment Arri locating points 1/4" threaded openings Full access to camera features Strap holder One piece of aluminum Lightweight

Key features: Pre-assembled three-piece half cage Solid cage-to-camera attachment (1x top & 2 x bottom 1/4 “ mounting screws) 3/8” Arri locating points 1/4" threaded openings Strap holder Cold shoe

Key features: 1/4" mounting points 1 x 3/8" mounting point Cold shoe Strap holder Ergonomic form Organic shape Easy access

Key features: 3 elements + 2 mounting screws 2 adjustable segments Aluminum made

Designed to support Nikon FTZ lens adapter.

Make Your filming Comfortable Developed and Designed in Poland Compatible with Sony VCT-14 tripod adapter plates Manfrotto 501PLONG plate included

Essential accessory for everyday use.

- Pre-assembled three-piece half cage- Solid cage-to-camera attachment(1x top & 2 x bottom 1/4 “ mounting screws)- 3/8” Arri locating points- 1/4" threaded openings- Strap holder- Cold shoe- Optional HDMI clamp

- Safety locks on both sides- Quick release system- Compatible with DJI R Quick-Release Plate (Upper)- Aluminum made

- 1/4" and 3/8" mounting points- 15mm rod openings- Rubber pads- Aluminum made- Lightweight build

- NATO standard- 95mm long- Safety pin- 3/8" thread + Arri locating points- Aluminum made

- 2 in 1- 15mm rod mount- NATO system- Quick release system- Aluminum made

- 1/4" mounting screw- 180-degree regulation- NATO standard- Rubber pads- Aluminum made

- Aluminum made- 2 screws - support-to-cage attachment- 2 screws - support-to-adapter attachment

- Dedicated to 8Sinn Canon EOS R5C Cage- Light weight- Aluminum made

- Quick-release system- Front/back, left/right adjustment- 1/4" & 3/8" mounting points- 1x 3/8" mounting point with Arri locating points- 2x cold shoe mounts- NATO standard mounting- Aluminum made- 95mm rail with the safety pin

- 1/4” mounting points- M4 mounting points- strap holders- cold shoe mount- lightweight build- aluminum made

- Mounting on Safety NATO Rail- 1/4" mounting points- 3/8” mounting points + Arri locating pins- Cold shoe mount- Aluminum made- Modern design

- Direct attachment to the camera- 2 points of support-to-camera attachment- 2 points of support-to-adapter attachment- Aluminum made

- Left and right side suitability- 2 points of plate-to-camera attachment- 1/4" mounting points- 3/8" mounting points + Arri locating points- Aluminum made

Key features: Length: 10" (254mm) Release pin Stopper screw Helicoil 1/4" threads Helicoil 3/8" threads

Key features: 1/4" and 3/8" mounting screw Aluminum made Rubber pads 0

Key features: 1/4" and 3/8" mounting screw Aluminum made Rubber pads

Wi-Fi and Bluetooth Camera Remote Camera Control from Syrp App Ramp Exposure During Time Lapse Control ISO, Aperture & Shutter Speed HDR Mode for Time-Lapse Sequences USB Rechargeable Internal Battery Included USB Type-C / USB Type-A Adapter Update Firmware Wirelessly

Lightweight weighing only 380g / 0.84 lbs Extends the Magic Carpet Carbon slider length by 0.6m / 2ft Smooth seamless join Detachable brackets for complete disassembly Endlessly extendable with multiple extensions & tripod mountable

Quick release legs with fine adjustment rubber feet Reversible 3/8”-16 to 1/4”-20 camera screw Genie rope hooks for easily adding motion control Includes 3m counterweight rope Carriage brake and level

Enables a Genie device to trigger your camera shutter Shoot timelapse, panorama, product photography & stop motion Length 38 cm (68 cm when stretched) Compatible with 100’s of different cameras Works with all Syrp motion controllers

Enables a Genie device to trigger your camera shutter Shoot timelapse, panorama, product photography & stop motion Length 38 cm (68 cm when stretched) Compatible with 100’s of different cameras Works with all Syrp motion controllers

Enables a Genie device to trigger your camera shutter Shoot timelapse, panorama, product photography & stop motion Length 38 cm (68 cm when stretched) Compatible with 100’s of different cameras Works with all Syrp motion controllers

Key features: 15mm rod compatible 6 x 1/4" threaded mounting points Aluminum made 60mm center-tocenter distance Thumb screw on each side

Key features: Stainless steel Reduction from 1/4" to 3/8" Height: 11mm; Width: 7 mm; Weight: 1g

Key features: 2 points of support-to-cage attachment 2 points of support-to-adapter attachment Aluminum made Lightweight

Key features: Universal (for monitors up to 7") 1/4" mounting points Adjustable foam handles Rubber padass Battery plate with M3 mounting points

Key features: 3 elemensts + two mounting screws 2 adjustable segments - HDMI and USB-C Aluminum made